Recycled metals

HMS or "Heavy-melting steel" is a common recycled metal grade. It contains ferrous pieces with a size of 150x50x50 cm.

Bonus is heavy-melting steel, but thinner than HMS. The Bonus is more than 6 mm thick iron.

Light scrap is mixed, light and thin iron scrap.

 

Fe-Turnings are turning chips from iron processing. Suitable for recycling.

 

Recycled new clean sheet metal, i.e. uncoated surplus sheet metal from industry.

Incineration plant scrap is an iron-containing recyclable metal fraction separated from the slag and ash of the incineration plant by a magnet.

Cast iron in its various forms.

The manganese alloy makes this iron alloy tough and it is often used, for example, in the mining industry. The manganese content of this iron alloy is typically more than 10%.

The most typical domestic selling grades of iron. Iron is classified into different E fractions according to the origin and thickness of the material.

Hard Zinc is a by-product of the zinc industry, which is created when the excess zinc used in coating is cast into a large ingot.

Zinc dust and other by-products of the zinc industry still contain a lot of zinc metal, which can be recovered and returned to circulation if properly treated.

 

Pure bare copper wire that is electrolytically clean without oxidation and coatings.

Oxidized copper scrap containing impurities, such as a used water pipe or oxidized copper wires. The verse may contain small amounts of other metals, for example in fasteners.

Brass in its various forms: sheets, tubes, slabs, etc. May not contain sockets, oxidized or iron-containing pieces.

Windings of small electric motors originating from incineration plants or from crushing.

Electrolytically pure copper granulate made from electrical conductors and cables.

Copper cable with a lead jacket between the insulation layer.

Taint Tabor Hammel, i.e. pure mixed alloyed aluminium processed into pieces about the size of a fist.

Aluminium rims either with accessories (valves, tire weights) or without them.

Marine aluminium or 5000 series aluminium. Magnesium makes this aluminium alloy corrosion-resistant.

Cast aluminium pieces that contain silicon and other alloys to guarantee good castability and machinability.

 

Electrolytically pure aluminium granulate made from electrical wires and cables.

An aluminium stick cut from electric wires and magnetized, with iron wires removed from the aluminium.

Aluminum cores removed from distribution network transformers.

Copper cores removed from distribution network transformers.